2018, Volume 13
Volume 13, No. 3 (September 2018)
Volume 13, No. 2 (June 2018)
Volume 13, No.1 (March 2018)

2017, Volume 12
Volume 12, No.3 (December 2017)
Volume 12, No.2 (September 2017)
Volume 12, No.1 (March 2017)

2016, Volume 11
Volume 11, No. 2 (December 2016)
Volume 11, No. 1 (June 2016)

2015, Volume 10

Volume 10, No. 4 (December 2015)
Volume 10, No. 3 (September 2015)
Volume 10, No. 2 (June 2015)
Volume 10, No. 1 (March 2015)

2014, Volume 9
Volume 9, No. 4 (December 2014)
Volume 9, No. 3 (September 2014)
Volume 9, No. 2 (June 2014)
Volume 9, No. 1 (March 2014)

2013, Volume 8
Volume 8, No. 4 (December 2013)
Volume 8, No. 3 (September 2013)
Volume 8, No. 2 (June 2013)
Volume 8, No. 1 (March 2013)

2012, Volume 7
Volume 7, No. 4 (December 2012)
Volume 7, No. 3 (September 2012)
Volume 7, No. 2 (June 2012)
Volume 7, No. 1 (March 2012)

2011, Volume 6
Volume 6, No. 4 (December 2011)
Volume 6, No. 3 (August 2011)
Volume 6, No. 2 (May 2011)
Volume 6, No. 1 (February 2011)

2010, Volume 5
Volume 5, No. 3 (December 2010)
Volume 5, No. 2 (August 2010)
Volume 5, No. 1 (April 2010)

2009, Volume 4
Volume 4, No. 2 (December 2009)
Volume 4, No. 1 (June 2009)

2008, Volume 3
Volume 3, No. 1/2 (June/December 2008)

2007, Volume 2
Volume 2, No. 1/2 (June/December 2007)

2006, Volume 1
Volume 1, No. 2 (December 2006)
Volume 1, No. 1 (June 2006)



 

 


Journal of Advanced Microscopy Research
ISSN: 2156-7573 (print); EISSN: 2156-7581 (online)
Copyright © 2000- American Scientific Publishers. All Rights Reserved.

jamr
  Journal of Advanced Microscopy Research (JAMR) is a multi-disciplinary peer-reviewed journal that provides a forum for rapid dissemination of important research developments in the fields of high-resolution microscopy techniques as well as their applications in all areas of science, engineering and medicine. JAMR focuses on all types of high-resolution microscopy techniques to image, map, characterize and analyze man-made and natural materials at micro- and nano-scale to study the physico-chemical phenomena such as abrasion, adhesion, corrosion and friction; to perform micro and nanofabrication, lithography, patterning, micro- and nano-manipulation; theory and modeling. JAMR reports cutting-edge research on advanced technologies and applications of microscopy in chemistry, physics, materials science, polymer science, engineering, biology, life sciences, health science, nanoscience and nanotechnology.

MANUSCRIPT SUBMISSION:
Submit manuscript electronically to the Editor-in-Chief: Professor Dr. Vladimir A. Basiuk

 

Volume 13, Number 3 (September 2018) pp.293-387

RESEARCH ARTICLES
Strategies for Reduction of “LED Blues”
Jörg Piper
J. Adv. Microsc. Res. 13, 293–297 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Special Histological Features of the Angioarchitecture of the Ovaries in the Egyptian Buffaloes (Bubalus bubalis)
Marwa M. Hussein and A. H. S. Hassan
J. Adv. Microsc. Res. 13, 298–305 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Mineralization and Consolidation Municipal Solid Waste Incineration Fly Ash by Microbial Cement
Lei Zhang, Guan-Qi Wei, Hui Rong, and Hai-Liang Wang
J. Adv. Microsc. Res. 13, 306–312 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Structure of Biocompatible Nanocoatings Obtained by Physical Vapor Deposition on Flexible Polyurethane for
Medical Applications

Anton V. Taran, Igor E. Garkusha, Valerij S. Taran, Nazar V. Pyvovar, Renat M. Muratov, Andrey V. Leonovych,
Grigorij P. Nikolaychuk, and Alexey A. Baturin

J. Adv. Microsc. Res. 13, 313–319 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Microstructural Properties of Inorganic Additives Amended Montmorillonite Soil
S. Bhuvaneshwari, M. K. Soundarya, and B. Soundara
J. Adv. Microsc. Res. 13, 320–325 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Classification of Microscopic Image of Herbal Plants from Its Powder Using Speeded-Up Robust Features
Bhupendra Fataniya, Tanish Zaveri, and Sanjeev Acharya
J. Adv. Microsc. Res. 13, 326–332 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Strengthening Method for Thin-Walled Knives with Multi-Layer Nanocoatings and Quality Assessment by
Non-Destructive Method

Tamara S. Skoblo, Svetlana P. Romaniuk, Alexander I. Sidashenko, Igor E. Garkusha, Valerij S. Taran,
Anton V. Taran, and Natalia N. Pilgui

J. Adv. Microsc. Res. 13, 333–338 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Nerve Cell Nucleolar Damage in Human Traumatic and Complicated Brain Injuries
Orlando J. Castejón
J. Adv. Microsc. Res. 13, 339–344 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Applied Histological and Chemical Analysis for Detection of Adulteration of Minced Meat and Sausage
Doaa M. Mokhtar, Doaa M. Abd-Elaziz, Hussein Youssef, and Amr Taha
J. Adv. Microsc. Res. 13, 345–353 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Identification of Optimized Gas Tungsten Constricted Arc Welding Parameters to Attain Minimum Fusion
Zone Area in Ti–6Al–4V Alloy Sheets Used in Aero Engine Components

V. Vaithiyanathan, V. Balasubramanian, S. Malarvizhi, Vijay Petley, and Shweta Verma
J. Adv. Microsc. Res. 13, 354–362 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Influence of Substrate Material on the Microstructure of Cu2ZnSnS4 Thin Films
Yauheni V. Asakovich, Simon A. Bashkirov, Alena V. Stanchik, Valery F. Gremenok, Raimondas Giraitis, Mikhail S. Tivanov,
Gennady F. Novikov, Vladimir V. Rakitin, and Uladzimir S. Hekkel

J. Adv. Microsc. Res. 13, 363–367 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Atomic Force Microscopy Topographic and Phase-Contrast Imaging of Silver Catalyst Supported on CaCO3
Charikleia Prochaska and Magdalini Kanari
J. Adv. Microsc. Res. 13, 368–375 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Growth of Needle-Shaped Crystals in Amorphous Films of Cr2O3 and V2O3 Under Electron-Beam Irradiation
Aleksandr G. Bagmut
J. Adv. Microsc. Res. 13, 376–380 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Effect of Electrical Discharge Coating on ZE41A Magnesium Alloy Using Sintered WC/Cu Composite
U. Elaiyarasan, V. Satheeshkumar, and C. Senthilkumar
J. Adv. Microsc. Res. 13, 381–387 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]


 
Volume 13, Number 2 (June 2018) pp.153-292

A SPECIAL ISSUE
Selected Peer-Reviewed Articles from the International Conference on Modern Innovations in Nanotechnology—
Science and Engineering of Materials (MINTSEM2018), Chidambaram, India, 1–2 February, 2018 – Part 2

Guest Editor: V. Srinivasan
J. Adv. Microsc. Res. 13, 153–154 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

RESEARCH ARTICLES
Morphological Investigations of Nanostructured ZrO2 Coating on Ti–6Al–4V by Scanning Electron Microscopy
and Scanning Probe Microscopy

K. Karthik, V. Srinivasan, and B. Karthikeyan
J. Adv. Microsc. Res. 13, 155–159 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Experimental Investigation on Machinability of Inconel 800 Using CNC WEDM and Modeling of Process Parameters
C. Nandakumar, B. Mohan, and Midthur A. Salman Khan
J. Adv. Microsc. Res. 13, 160–165 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Evaluation of Tensile Properties of Epoxy Nanocomposite
V. Navaneetha Krishnan, C. Senthil Kumar, and G. Ganesan
J. Adv. Microsc. Res. 13, 166–170 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Electrical Discharge Machining of Sillimanite Reinforced Aluminium Metal Matrix Composites
M. Pethuraj, M. Uthayakumar, S. Rajakarunakaran, and S. Rajesh
J. Adv. Microsc. Res. 13, 171–175 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Influence of Laser Scan Speed on Bronze Nickel Alloy Produced by Direct Metal Laser Sintering Techniquev
R. Rajesh and Mithun V. Kulkarni
J. Adv. Microsc. Res. 13, 176–180 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Optimizing Chemical Vapor Deposition Parameters to Attain Minimum Diameter Carbon Nano Tubes by
Response Surface Methodology

V. Sivamaran, V. Balasubramanian, M. Gopalakrishnan, V. Viswabaskaran, and A. Gouravrao
J. Adv. Microsc. Res. 13, 181–189 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Fracture Toughness Properties of Friction Stir Welded AA 7075-T651 Aluminium Alloy Joints
P. Sivaraja, D. Kanagarajan, and V. Balasubramanian
J. Adv. Microsc. Res. 13, 190–197 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Microstructural Characteristics and Load Carrying Capability of Resistance Spot Welded Dual Phase (DP800)
Steel Joints

C. Rajarajan, P. Sivaraj, and V. Balasubramanian
J. Adv. Microsc. Res. 13, 198–203 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Optimizing Linear Friction Welding Parameters to Attain Maximum Tensile Strength in Aluminum Alloy Joints
P. Sivaraj, J. Ahamed Bahavudeen, and V. Balasubramanian
J. Adv. Microsc. Res. 13, 204–210 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Effects of Friction Pressure and Friction Time on the Mechanical and Microstructure Properties of Friction
Welded IN718 and SS410 Dissimilar Joints

P. Anitha, M. C. Majumder, V. Saravanan, and S. Rajakumar
J. Adv. Microsc. Res. 13, 211–216 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Synthesis and Characterization of Few Layer Graphene Nanosheets for Supercapacitor Applications
S. A. Thaneswari
J. Adv. Microsc. Res. 13, 217–222 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Direct Growth of Multi-Walled Carbon Nanotubes on Ni Foil by Chemical Vapor Deposition Method for
Supercapacitor Applications

S. A. Thaneswari
J. Adv. Microsc. Res. 13, 223–229 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Sensitivity Analysis of Delamination Factor in Drilling GFR Polyester Composites Using Brad and Spur Drill
T. V. Rajamurugan, A. Velmurugan, K. Syedjafar, and N. Muthukumaran
J. Adv. Microsc. Res. 13, 230–238 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Microstructure and Surface Morphology Characterization of Laser Hardfaced INCONEL-625 Exposed to
Dry Sliding Wear

A. UmeshBala and R. Varahamoorthi
J. Adv. Microsc. Res. 13, 239–243 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Tribological Characteristics of Aluminium Matrix Reinforced with Organic and Inorganic Particulates
S. Ramanathan and B. Vinod
J. Adv. Microsc. Res. 13, 244–253 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Effect of Zener-Hollomon Parameter on the Flow Behaviour and Microstructure Evolution of Al-7Si-0.3Mg
Alloy with Organic and Inorganic Particles During Hot Deformation at Different Strain Rates

B. Vinod and S. Ramanathan
J. Adv. Microsc. Res. 13, 254–264 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Influence of Higher Wall Angle on Formability in Spif of AISI 316L
A. Visagan and P. Ganesh
J. Adv. Microsc. Res. 13, 265–269 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Optimization of Wear Parameters Using the Grey Relational Analysis
N. Mohamad Raffi, V. Srinivasan, and P. Narender Singh
J. Adv. Microsc. Res. 13, 270–277 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Influence of Rotational Speed on Mechanical and Microstructural Characteristics on the Rotary Friction
Welded LM25/10%SiC Aluminium Metal Matrix Composites

Abdul Ghani Khan and S. Rajakumar
J. Adv. Microsc. Res. 13, 278–281 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Evaluation of Mechanical Properties of Al (2014)-Nickel Coated SiC Composites Subjected to Equal
Channel Angular Pressing

M. Jaivignesh, A. Suresh Babu, S. Dhanalakshmi, and K. Shanmuga Sundaram
J. Adv. Microsc. Res. 13, 282–292 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]


 
Volume 13, Number 1 (March 2018) pp.1-151

A SPECIAL ISSUE
Selected Peer-Reviewed Articles from the International Conference on Modern Innovations in
Nanotechnology—Science and Engineering of Materials (MINTSEM2018), Chidambaram, India,
1–2 February, 2018 – Part 1

Guest Editor: V. Srinivasan
J. Adv. Microsc. Res. 13, 1–2 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

RESEARCH ARTICLES
ZnO/TiO2 Nanocomposites Semiconductor for Bacterial Applications and Dye-Sensitized Solar Cell Applications
N. Geetha, S. Sivaranjani, A. Ayeshamariam, M. Kavin Micheal, D. Saravankkumar, S. A. Fowziya, A. M. Uduman Mohideen,
and M. Jayachandran

J. Adv. Microsc. Res. 13, 3–11 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

High Performance Photo-Catalyst Based on Nanosized ZnO–TiO2 Nanoplatelets for Removal of RhB Under
Visible Light Irradiation

N. Geetha, S. Sivaranjani, A. Ayeshamariam, M. Siva Bharathy, S. Nivetha, K. Kaviyarasu, and M. Jayachandran
J. Adv. Microsc. Res. 13, 12–19 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Study on Anticorrosion Behavior of Poly(N-vinylimidazole-co-methoxyethyl methacrylate) Based Coating
in the Aggressive Chloride Ion Environment

D. Thirumoolan, T. Siva, S. Sathiyanarayanan, K. Anver Basha, K. Kaviyarasu, A. Ayeshamariam, and M. Jayachandran
J. Adv. Microsc. Res. 13, 20–32 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Jet Nebuliser Technique to Prepare Nickel Oxide Thin Films and Its Characterisations
R. Thirumamagal, A. Ayeshamariam, S. Gnanasaravanan, G. Balasubramaniyan, S. Nivetha, S. Abinaya,
and M. Jayachandran

J. Adv. Microsc. Res. 13, 33–38 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Natural Biocide Loaded PLA Films for a Possible Packaging Application
S. Ananda Kumar and S. Aparna
J. Adv. Microsc. Res. 13, 39–47 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

A Facile Strategy for the Synthesis of Flower-Like Structures with Enhanced Nano-Porous Surfaces
P. Anandha Ganesh and D. Jeyakumar
J. Adv. Microsc. Res. 13, 48–53 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Mechanical Characteristics of Chitosan Dispersed Poly Lactic Acid/Basalt Fiber Hybrid Composites
A. Arul Jeya Kumar, I. Ashok Kumar, V. Srinivasan, and N. Mohamad Raffi
J. Adv. Microsc. Res. 13, 54–60 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

A Study on the Interface Microstructure of Diffusion Bonded AISI410/SU718 Dissimilar Joints
A. Arun Negemiya, S. Rajakumar, and V. Balasubramanian
J. Adv. Microsc. Res. 13, 61–64 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Wear Study on Basalt, Flax and Hybrid Fiber Reinforced Phenolic Composites
I. Ashok Kumar, A. Arul Jeya Kumar, V. Srinivasan, and N. Mohammad Raffi
J. Adv. Microsc. Res. 13, 65–71 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Fractography Analysis and Modeling Studies on Friction Stir Welded AA6061/SiC Composite
P. Manoj Kumar, K. Balamurugan, S. Gowthaman, S. Mohammad Ghouse, and K. V. Suryaharshith
J. Adv. Microsc. Res. 13, 72–78 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Modeling of Electrical Discharge Coating Parameters Using Artificial Neural Network
U. Elaiyarasan, V. Satheeshkumar, and C. Senthilkumar
J. Adv. Microsc. Res. 13, 79–84 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Investigation of Mechanical Behaviour on Bagasse/Basalt Reinforced Poly Lactic Acid Hybrid Composites:
Tensile, Flexural, Impact and Water Absorption

M. Francis Luther King, A. Arul Jeyakumar, and V. Srinivasan
J. Adv. Microsc. Res. 13, 85–91 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Investigation of Thermal Properties on Bagasse/Basalt Fiber Reinforced Poly Lactic Acid Hybrid Composites
M. Francis Luther King, A. Arul Jeyakumar, and V. Srinivasan
J. Adv. Microsc. Res. 13, 92–100 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Experimental Study on the Stress–Strain Relationship of Glass Fiber Reinforced Polymer and Lateral Ties
Confined Engineered Fiber Reinforced Concrete Under Axial Compression

P. Ganesan and P. Sivaraj
J. Adv. Microsc. Res. 13, 101–106 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Mechanical and Micro-Structural Characteristics of Al SiC Metal Matrix with TiO2 Nano Composites
N. Prem Kumar and N. Mani
J. Adv. Microsc. Res. 13, 107–111 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Mechanical Behaviour of Palm Seed Shell Fiber Reinforced Polymer Composites: Tensile, Flexural and
Impact Properties

T. Purushothaman and M. Francis Luther King
J. Adv. Microsc. Res. 13, 112–117 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

An Investigation on the Mechanical Properties of Nano-Al2O3 and TiC Reinforced Aluminum Matrix
Hybrid Composites

S. Ravindran, N. Mani, M. Francis Luther King, and R. Vimalathithan
J. Adv. Microsc. Res. 13, 118–124 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Mechanical Properties of Al 6061/TiB2 In-Situ Formed Metal Matrix Composites
B. Gobalakrishnan, P. R. Lakshminarayanan, and R. Varahamoorthi
J. Adv. Microsc. Res. 13, 125–130 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Interaction of Tryptophan Single Amino Acid Derived Nanotubes with Copper Nanoparticles Study
Through Microscopic Tool

R. Govindhan and B. Karthikeyan
J. Adv. Microsc. Res. 13, 131–137 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Influence of Copper and Iron on Corrosion of Gravity Die Cast Al–Si–Mg–Ni Alloys
S. Gunabalan and R. Elansezhian
J. Adv. Microsc. Res. 13, 138–142 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]

Nanoscale Zero Valent Iron Supported on Montmorillonite Clay for the Removal of Cu(II) from Aqueous Solution
K. Jayaraj, A. Rajeswari, E. JackcinaStobel Christy, G. Aruna Devi, and Anitha Pius
J. Adv. Microsc. Res. 13, 143–151 (2018)
[Abstract] [Full Text - PDF] [Purchase Article]



Terms and Conditions  Privacy Policy  Copyright © 2000- American Scientific Publishers. All Rights Reserved.